16 Megabit (2M x8Bit/1M x16Bit)
CMOS 3.0 Volt-only Boot Sector Flash Memory

General Description
The ES29LV160D is a 16 megabit, 3.0 Volt-only Flash memory device, organized as 2M x8bits or 1M x16bits which is configured by BYTE#. The device is manufactured with highly reliable 0.18um CMOS flash technology. The device is offered in 48-ball FBGA, 44-pin SO, and 48-pin TSOP packages.

  
 
Architecture
* Single power supply operation
- Full voltage range: 2.7 to 3.6 Volt read and write operations
- Regulated voltage range: 3.0 to 3.6 Volt read and write operations for high performance 3.3 Volt - microprocessors

* Flexible sector architecture
- One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64 Kbyte sectors (byte mode)
- One 8 Kword, two 4 Kword, one 16 Kword, and thirty-one 32 Kword sectors (word mode)
* Supports full chip erase
* Sector Protection feature
* Top or bottom boot block configurations
* Compatible with JEDEC standards
* Pinout and software compatible with single power supply Flash



Packages
- 48-ball FBGA
- 48-pin TSOP

Performance
* Access times as fast as 90 ns
* Low power consumption (typical values at 5 MHz)
- 200 nA Automatic Sleep mode & standby mode current
- 9 mA read current
- 15 mA program/erase current
* Minimum 100,000 write cycle guarantee per sector
* 20-year data retention at 125¡ÆC

Software Features
* Unlock Bypass Mode Program Command
* Supports CFI (Common Flash Interface)
* Data# Polling and Toggle Bits
* Erase Suspend/Erase Resume

Hardware Features
* Ready/Busy# pin (RY/BY#)
* Hardware reset pin (RESET#)